How To Load A Staple Gun

Do it yourself

Some of you may often use a stapler for your work. Therefore, you need to know how to reload the staple gun. The truth is that you will find that reloading the staples back into the manual staple gun is an effortless task to do. This means that you will need to make sure that you have enough staples to finish your job.

Follow how you are about to reload the heavy duty staple gun, no matter what model you own. In this case, you should be very careful when reloading the gun correctly to avoid any accidents that may put your safety at risk. We invite you to learn a bit about the staple gun framing process.

Some useful tips for loading a staple gun

The first thing you should do is to find a pusher rod. You will find it on the back of the heavy duty stapler or staple gun. This is usually an "x1" square. To do this, you must make sure that each side of the square has some dimples so that you will have a better grip. Then, it would be best if you grabbed these areas with your thumb and forefinger on each side. Then, you should push down and extract the release from the rod assembly.
The second thing that you should do is insert the staples. To do this, you will need to make sure that the staples are compatible with the basic elements above. You should insert them into the two parallel metal rails exposed on the back of the staple gun.

The third thing you must do is to reinsert the push rod assembly. To do this, you must insert it back into the stapler or stapler gun. To lock the pushrod, simply push the rod straight into the opening and make sure that it cannot go any further. After that, you should push it down and in.
Now, your stapler or stapler gun has been filled with the new staples you need to do stapling jobs. As you have seen, this is not a time-consuming process, and if you do it the right way, you will have complete safety.

Last Updated on April 26, 2021 by Nelson